|
|
$6.00
1 available |
MAGIC CUBE MAGNETIZER- DEMAGNETIZER FOR TOOLS & PARTS
One of the handiest accessories in any tool box! Can both add and remove magnetic charges as needed
Strong permanent magnets rearrange magnetic domains in hand tools, parts & other iron objects
Simple to use - insert tool or object in labeled slot, move back/forth or circular motion briefly
Magnetize screwdrivers & driver bits so they'll hold unto screws, avoid dropped/lost parts
Demagnetize tools or small parts that have unwanted magnetic 'cling'; ABS body, 2" x 2", 3 oz
|
|
|
$9.95
2 available |
MAGNETIC BIT HOLDER EXTENSIONS 2-4-6" QUICK CHANGE LIFETIME WARRANTY
Must-have accessory set for power drills and impact drivers
Extensions in lengths 6", 4" & 2" for superior access for hard-to-reach fasteners
Strong permanent magnets hold bits securely in place; accepts all 1/4" hex-shank bits
1/4" quick-change hex shanks fit all power drills, 1/4" impact drivers and hand-held drivers
Hardened & tempered tool steel with chrome-finish holders; manufacturer's lifetime warranty
|
|
|
$3.00
1 available |
MAGNETIC NUT SETTERS QUICK CHANGE CHOOSE FROM 1/4 - 7/16"
•Turn drill or impact driver into high-speed power nut setter; manufacturer's lifetime warranty
•4 of the most-used sizes of 1/4", 5/16", 3/8" & 7/16" 2" length with standard well
•Permanent magnet keeps nuts/bolts firmly seated in socket for one-handed setting & no dropped nuts
•Quick-change 1/4" hex shank fits most popular impact drivers, drill chucks 3/8" & up & adapters
•Heat treated Chrome-Vanadium alloy steel designed for high-torque applications; sand blasted finish
|
|
|
$2.95
3 available |
OLYMPIA TOOLS UTILITY KNIFE BLADES 5 PACK
REPLACEMENT BLADES BELONG IN EVERY TOOL BOX
|
|
|
$6.50
2 available |
PICK UP, 18" FLEXIBLE MAGNETIC - 2 Lb CAPACITY -SOFT GRIP HANDLE
•Super-handy tool for retrieving dropped nuts/bolts, parts and tools
•Strong magnetic tip can lift up to 2 lbs
•Flex-cable shaft bends around corners and obstructions
•5/16"-diameter tip gets into small spaces and tight fits; weighs less than 2 oz
•Non-slip soft-grip handle has firm hold even with wet hands; overall length 18"
|
|
|
$39.95
Out of stock. Call for availability |
PROFESSIONAL 10 PIECE SAE LONG T-HANDLE HEX KEY WRENCH SET SOFT GRIP
Easy-to-grip T-handle design allows for maximum torque application for stubborn hex bolts
6 in. length for deep-set screws/bolts, reach through obstructions - great for bikes, motorcycles
Hardened and tempered tool steel resists twisting and cam-out; also available in Metric
Comfortable insulating soft PVC grip provides non-slip hold even when wet, marked with size
10 most-used SAE sizes 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"; vinyl storage pouch
|
|
|
$52.00
Out of stock. Call for availability |
PUNCH, SET, 6MM 36 PIECE LARGE 1/4" LETTER & NUMBER STAMP
Stamp letters & numbers into steel and other metals
Complete set of 26 upper-case letters, ampersand (&) and numbers 0 - 9; professional quality
Larger characters are easy-to-read, 1/4" height (6mm); set weight 40 oz
High-durability hardened and tempered carbon steel 2-1/2" length with 5/16" square shank
Permanently identify equipment, tools & valuables; customize Code Data and NY/NJ I.D. tags
|
|
|
$11.00
1 available |
QUALITY PENCIL STYLE SOLDERING IRON 30 WATT UL LISTED
Basic easy-to-use pencil-style soldering iron; excellent quality & value
30-watt element produces quick warm-up with even heat during use; 110VAC
Stay-cool Bakelite handle allows natural holding position
Includes replaceable soldering tip; UL-listed with 40" power cord
8" length overall, weight just 2.5 oz
|
|
|
$15.25
Out of stock. Call for availability |
QUALITY SPANNER DRIVE WITH #6, #8, and #10 BITS IN HANDLE
Quality Spanner Driver conveniently stores bits in the handle. Includes 3 bits, #6, #8, and #10. A must have in every tool box.
|
|
|
$4.50
Out of stock. Call for availability |
REPLACEMENT # 10/12 SPANNER BITS FOR MEP-Z51
REPLACEMENT # 10/12 SPANNER BITS FOR MEP-Z51
|
|
|
$4.25
Out of stock. Call for availability |
REPLACEMENT # 6/8 SPANNER BITS FOR MEP-Z51
REPLACEMENT # 6/8 SPANNER BITS FOR MEP-Z51
|
|
|
$10.00
3 available |
SCREW EXTRACTOR SET 5 SIZES, TEMPERED STEEL
Tempered chrome vanadium steel.
Removes broken screws, bolts, and studs without damaging bolt or hole threads.
Sizes: 1/8" - 1/4", 1/4" - 5/16", 5/16" - 7/16", 7/16" - 9/16",
9/16" - 3/4"
|
|
|
$7.00
Out of stock. Call for availability |
SET OF 3 REPLACEMENT SPANNER TIPS FOR MEP-Z52 #6, #8, and #10
SET OF 3 REPLACEMENT SPANNER TIPS FOR MEP-Z52 #6, #8, and #10
|
|
|
$7.95
4 available |
SOFT GRIP SNAP OFF UTILITY KNIFE, 6 BLADES, LIFETIME WARRANTY
•Full-featured utility knife cutter with Manufacturer's Lifetime Warranty; 6.5" length, 2.7 oz
•Rugged & lightweight ABS handle with inlaid rubber for comfortable, non-slip grip; lanyard hole
•Steel blade track supports heavy-duty cutting; thumb-slide blade extend/retract with position lock
•Each snap-off blade has 8 sections so you'll always have razor-sharp cutting edge; easy blade change
•Includes one blade in knife plus sealed pack of five extra blades; 4.5" x .75" tempered stee
|
|
|
$31.00
1 available |
SOLDER GUN ,WELLER PORTABLE, BATTERY OPERATED
Features and Benefits:•Weller quality performance in a fully portable battery powered soldering iron
•The heater is contained in the tip for fast heat - up (15 seconds)
•Package comes with tip, cap, solder, and batteries
•The unit carries an average of over 120 intermittent solder joints with fresh batteries
•Light weight design - portable great for field work
•Safety cap included - safety cap activates an off switch when closed to insure proper use
•Built - in base - Tool sits on its end
|
|
|
$31.00
1 available |
SOLDER GUN, WILMAR PERFORMANCE HEAVY DUTY SOLDERING GUN KIT
Features:
Extra soldering wire
Built-in spotlight
Instant heat
Extra tip
|
|
|
$2.50
60 available |
Stubby Multi-End Screwdrivers Phillip/flat
Features Phillip/flat head reversible tip insert and large grip handle.
|
|
|
$17.50
1 available |
SUPER HANDY 16" FLEX SHAFT SOCKET DRIVER
Pro-Grade 16" Flexible Shaft Driver + 1/4" Driver Bit Adapter
Essential hand tool for professionals excellent qualityUnique wound spring-steel flex shaft bends around obstructions and into hard-to-reach areas
4" handle with 6" shaft plus 6" extension; 1/4" square anvil with spring ball bearing socket holder
Includes special bit adapter, fits any 1/4" hex driver bit - Phillips, TORX, tamper-proof
Must-have for mechanics; built professional grade with rust-resistant chrome fini
|
|
|
$5.75
1 available |
TOOL SHOP SELF RETRACTING UTILITY KNIFE
NEW! TOOL SHOP SELF RETRACTING UTILITY KNIFE. NEW IN FACTORY SEALED PACKAGE! NEVER USED. BLADE RETURNS AUTOMATICALLY WHEN THUMB SLIDE IS RELEASED. HEAVY DUTY DIE CAST BODY. SAFE OVER/UNDER GUIDE. SPRING LOADED THUMB SLIDE. INCLUDES ONE BLADE. THE FAMOUS TOOL SHOP HAND TOOL FOREVER WARRANTY
|
|
|
$16.50
2 available |
TOOL, 15 MULTI-FUNCTION
15 Piece Tool Set. Absolutely a "must have" tool
So many ways to use this single piece Tool Set. Comes with a small blade, large blade, serrated blade, needle nose pliers, regular pliers, bottle opener, wire cutters, small wire stripper, large wire stripper, file, small screwdriver, large screwdriver, phillips screwdriver, heavy duty pliers handle and pry bar, with a heavy duty Nylon sheath. Made with Surgical Stainless Steel ! Limited Lifetime Warranty printed on the package-with instruction
|
|
|
$39.50
Out of stock. Call for availability |
TOP QUALITY MULTI-TIP SCREWDRIVER WITH 14 BITS PLUS 2 SPANNER BITS
Phillips S2 Steel Double End Bit sizes 1-2, 0-3
Square (Robertson) S2 Steel Double End Bit Sizes 1-2, 0-3
Torx (Star) S2 Steel Double End Bit Sizes 10-15, 20-25
Flat (Slot) S2 Steel Double End Bit Sizes 4-6
Spanner bits in sizes 6-8 and 10-12
|
|
|
$6.75
2 available |
TORPEDO LEVEL, 9" JOHNSON MADE IN USA
Classic easy-to-use and reliable torpedo level, made in USA by Johnson Level & Tool
•Popular 9" length with 3 vials for plumb, level & 45-degree angle
•High-impact composite Structo-Cast frame is non-conductive and non-corrosive
•V-groove edge fits on pipe and conduit; weighs just 2.4 oz
•Hi-visibility Orange is easy to spot; outstanding value in professional tool
|
|
|
$10.50
Out of stock. Call for availability |
X-LONG 36" FLEX CABLE PICK UP TOOL 4-FINGER CLAW END RETRIEVER
Extra-long pick-up range for retrieving dropped or hidden small parts & other items
36" length 50% longer than regular pick-up claws - like having 3 foot-long finger!
Wound-steel cable flexes to bend around corners and obstacles
Spring-loaded plunger extends & auto-retracts carbon steel claw to lift up to 1 lb
Must-have tool for mechanics, great for grabbing under controlers, in crevices & down drains
|
|
|
